Maxon WL7 Especificações descarregar pdf (Página 34)

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713

PATENTS PENDING

1. Position the platform at ﬂ oor level

(FIG. 34-1).

2. Turn OFF power switch on pump

cover (FIG. 34-1).

PLATFORM AT FLOOR LEVEL

(LH SIDE SHOWN)

FIG. 34-1

POWER

SWITCH

INBOARD SWITCH ADJUSTMENT

NOTE: Do this procedure if structure of the Lift is undamaged and:

• The Controller reads “IBRS SW” when Inboard Rollstop is locked in the up

position.

• Inboard Switch is removed & replaced.

The adjustment is done correctly if:

• The Controller does not read “IBRS SW” when the Inboard Rollstop is

locked in the up position.

3. Using the manual backup pump (FIG. 34-

2), lower the platform until inboard rollstop

(IBRS) is locked in the up position (FIG. 35-

1). Refer to Operation Manual for instruc-

tions to operate the manual pump.

USING BACKUP PUMP TO UNFOLD

(LIFT WITH LH PUMP)

FIG. 34-2

RELEASE

VALVE

BACKUP PUMP

HANDLE

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 90 91

Sem comentários

Maxon WL7 Especificações Página 34