Maxon WL7 Especificações descarregar pdf (Página 30)

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713

PATENTS PENDING

PRESSURE SWITCH ADJUSTMENT (IF EQUIPPED)

1. Make sure power switch (FIG. 30-1) is

turned on and illuminated. UNFOLD

Platform and then lower it DOWN to

the ground (FIG. 30-1).

PLATFORM AT

“FOLD” (STOWED)

POSITION

PLATFORM AT

GROUND LEVEL

FOLDING & UNFOLDING PLATFORM

FIG. 30-1

PLATFORM AT FLOOR LEVEL

INBOARD ROLLSTOP LINED

UP WITH BASE PLATE

FIG. 30-2

INBOARD

ROLLSTOP

BASE PLATE

+1/4 /-0”

NOTE: Before doing this procedure, make sure vehicle battery is fully charged.

An undercharged battery can make Lift operate incorrectly.

2. Raise the Platform until it comes to a

full stop at vehicle floor level, and the

Inboard Rollstop and Base Plate are

aligned (FIG. 30-2). Controller read-

ing should be FLOOR (FIG. 30-3).

ILLUMINATED

POWER SWITCH

CONTROLLER READING -

PLATFORM AT FLOOR LEVEL

FIG. 30-3

FLOOR

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 60 61

Sem comentários

Maxon WL7 Especificações Página 30